Sunday 23 March 2014

Harris Suites fX Sudirman, Jakarta: Stayed and Reviewed.

I have stayed at Harris Suites fX Sudirman in Jakarta couple of times for business. The company that I am working for did offer a few hotels that is in a certain price range but the hotels were either run down or out of the way.

I decided to find my own accommodation that meets the office budget and my own personal conditions. And Harris Suites fX Sudirman meets all of it. My criteria are as follows:

1) Access to food. I am quite tired of eating hotel food. They tend to look and taste the same and the cost is expensive. I would prefer to try local food and it has to be accessible.
Harris Suites fX Sudirman: The hotel is located on top of a 8-storey mall which comprises mainly of restaurants and food stalls. There is also a supermarket and pharmacy on the basement floor. There are a lot of food options here.


Harris Suites fX Sudirman. The mall is on the
lower ground with the hotel and residences on
the tower block.

2) Traffic. Jakarta is well known for its traffic jam. I would have to factor in the travel time for my appointments. So the hotel would have to be near the main road where most of my clients are located . The entry and exit of the hotel driveway has to be easily accessible for taxis and cars.
Harris Suites fX Sudirman: The mall is located on one of the main thoroughfare, Jalan Sudirman with the major office buildings along this road. Getting in and out of the building by taxi is not a problem.

3) Taxis. My present company does not provide expenses to rent my own car in Jakarta. This would mean I have to rely on the normal Blue Bird taxi. The hotel that I stay in must have enough number of taxis in standby at its driveway.
Harris Suites fX Sudirman: Because it is a major mall,. there are always the Blue Bird taxis on queue outside the main entrance, even late at night. Most of the taxis are familiar with this building as well.


The road in purple is Jalan Sudirman, the main thoroughfare on the
Central Business District.

4) Cost. As mentioned earlier on, the cost of the hotel must be reasonable. It cannot be 4-5 stars standard, unfortunately, because my wonderful company will not pay.
Harris Suites fX Sudirman: There are several packages for this hotel. The regular room costs IDR908,000 per night which is around USD79. Another package, which I recommend is the SIMPLE Business package, which costs IDR958,000 per night. With a minimum of 2 nights, it includes 4 pieces of Laundry per day.

5) Wifi. It has to be free, preferably.
Harris Suites fX Sudirman: All rooms come with free wifi. The wifi is quite reliable.


Here are some pictures of the place that I stayed:


The lobby area. The lifts are located beyond the glass door.


fX Suite Room upon entry.


The mini-minibar along the hallway.


The bathroom is extremely spacious. The shower
area on the left.


It is quite clean.


The opened wardrobe. The entrance door at the
background, on the left.


The study table is large enough to share with the TV.



A good feature that is often overlook by other major hotels i.e. a
power point that is convenient located next to the bed.



The bed is quite clean and comfortable.



One side of the table is used for work.



A unused space. It would be good if they place a single armchair here.



The other bedside table with powerpoint. There are 2 located here.


The view from the window. The green area on the
background is the golf range. On the foreground is the
 softball pitch.



The office buildings are located along the main road.

The Harris Suites fX Sudirman received regular good reviews on Tripadvisor. And rightly so. I have stayed on higher floor before and the views are fantastic. This is definitely one of the hotels I would stay again in Jakarta.

Have you stayed here before?

Let me know on the comments section below.


Saturday 15 March 2014

DLink DNS 320 NAS: Upgrade of hard drive

I have a Network Attached Storage (NAS) from D-Link which is the ShareCenter Pulse DNS 320. I bought this NAS in 2nd Sept 2011. It came bundled with a Hitachi 1TB hard drive. Total cost: SGD$169. At that time, no one was quite sure how big was 1TB. People was mainly dealing in GB. So moving to TB territory was quite a breakthrough at that time.

The NAS full kit. Taken from shadowandy.net

From behind. Taken from shadowandy.net

The parts itemised.


The front.

I took some pictures from shadowandy website because his pictures are quite detailed. I bought the D-Link NAS because I wanted to store items away from my PC. Items like movies, photos and documents. I did not consider any backups as my documents and photos were small and manageable, at that time. The cost was quite reasonable and it has all the basic functions of a decent NAS.

Somehow, along the way, the family photos grew tremendously. The documents stored became of important nature. It began to take up disk space at an accelerated pace with no backup. Some of these items are irreplaceable. I decided to increase my hard drive capacity.

On the recent IT Show 2014, held from 27th Feb to 2nd March, I bought 2 x 3TB Western Digital Red Hard Drive. The Red drive is catered for NAS usage. The cost of the hard drive is SGD174 each.



I intend to transfer the items from the original 1TB hard drive to one of the 3TB hard drive. I will make that my new primary drive. I will remove the 1TB and then put in the 2nd 3TB hard drive as the secondary drive.

Here are the steps at how I format, copied over and installed the new hard drives for the DNS 320.



1st 3TB hard drive slotted on the right hand side.

1) Format the new Hard Drive
I would need to format the new hard drive. With the top cover of the DNS 320 opened, I removed the original 1TB hard drive and slot in the new hard drive on the right bay. Turned it on and access it via its web interface.



The DNS 320 ShareCenter will detect a new hard drive and launch the configuration wizard, as per the above picture. By clicking on Next, the configuration wizard will commence.



Step 1 will provide details of the new hard drive.



Step 2 will ask the RAID type for your setup. If there are 2 hard drives, there will be 4 RAID types indicated such as

1) Standard
2) JBOD
3) RAID 0
4) RAID 1

However, in this case, since I have only 1 drive, there is only 1 selection which is the Standard setup.



Step 3, once the format button is clicked, the status will be indicated on the page above.



After it is completed, it will update with the status as indicated. This means that the 3TB hard drive has been formatted.


2)Transfer Data from old to new hard drive
The 3TB hard drive on the right hand bay is now formatted and ready. The original 1TB is now placed back on the left hand bay.


The formatted 3TB on the right. The original 1TB on
the left.

Now is the arduous task of copying the files from the 1TB over to the 3TB. There are 2 ways of doing this. One way is the traditional method of copying and pasting from windows explorer. The other way is from a application on the ShareCenter web interface. 


As indicated from the picture above, this is the Local Backup application. The location of file or folder and its destination can be indicated on the interface above.

The advantage of doing it this way, the PC can be turned off as it is conducted within the NAS. You can even leave it overnight.

It took me 2 days to transfer all my files and documents. The most time consuming was the movie files as it consists the bulk of my 1TB hard drive. Once all folders and documents are confirmed moved to the new 3TB hard drive, its time to commence on the next phase.


3) Putting in the 2nd 3TB hard drive
The 1TB hard drive is removed and replaced with the 2nd 3TB hard drive on the left hand bay. Just to be on the safe side, the 1st 3TB hard drive on the right was removed.

With the NAS turned on, the DNS 320 ShareCenter web interface launched, the 2nd 3TB hard drive is formatted. Same steps as above.

Once formatted, the 1st 3TB hard drive is slotted back on the right hand bay.


Both 3TB hard drive in its respective bays.


4) Final Result
In Windows Explorer, with the NAS turned on, I will get the following. Both hard drives are detected. A huge sigh of relief.



One thing to take note, the DNS 320 is on firmware 2.03. One of the features of this current firmware is the web interface, which has been improved compared to the previous interface. The other feature is the Peer2Peer folder. Prior to the firmware, the P2P folder was within Volume_1. Now it resides outside of Volume_1 as a separate folder. From the picture above, I have only created only one P2P folder. My movie files are in this P2P folder and I do not plan to create back-ups of this movie folder. The rest of the folders will be backed up from Volume 1 to Volume 2.

I am keeping my original 1TB hard drive in an anti-static plastic wrap for the meantime. I am not sure until when as it still contains a lot of precious materials. I could look into re-formatting the hard drive and using it as a Windows drive or just keeping it aside for a while.

Do let me know if there are any suggestions as to my steps I mentioned above.